LS1200 SHR Diode Laser

SAPPHIRE LS1200 SHR Laser

HIGH-END DIODE LASER HAIR REMOVAL

Sapphire MED SHR Laser LS1200 zur dauerhaften SHR Diodenlaser Haarentfernung Header

MEDICAL
APPROVAL

MADE
IN EUROPE

50 MILLION
APPLICATOR PULSES

COMPLETELY
PAINLESS

THE MOST POWERFUL, DURABLE & GENTLE SHR LASER FOR PERMANENT HAIR REMOVAL - MADE IN EUROPE

The SAPPHIRE LS1200 is currently the most revolutionary SHR hair removal laser with medical approval – developed & produced in Europe for use in cosmetic studios, medical & medical practices. The LS1200 SHR laser sets new technical standards: 50 million applicator pulses, 1200W spot power, 2 high-performance power supplies and a special gas cooling system with cooling power down to -10°C are incomparable throughout Europe.

For many years, permanent hair removal has been one of the biggest topics in apparative cosmetics. The awareness of a hair-free, smooth body is now equally pronounced in both women and men.

While in the past mainly IPL devices were used for permanent hair removal, the SHR diode laser, also known as SHR laser, has now established itself as the newest, most effective & most gentle technology.

The SAPPHIRE LS1200 SHR laser/diode laser, developed & produced in Europe, is considered the most innovative & powerful SHR hair removal laser of its generation – with medical approval.

Compared to the original IPL device technology, the LS1200 SHR laser/diode laser and its dual-focused mode of action through the SHR glide technology makes permanent hair removal possible from as few as 4 treatments – and for almost every hair & skin type.

The LS1200 SHR laser/diode laser also sets new technical standards: with an effective spot power of 1200W, the hair removal laser is the most powerful of its generation. The 2 parallel high-power power supplies distinguish the SAPPHIRE laser from other hair removal devices and enable fast pulse sequences without sacrificing performance.

In combination with a pulse frequency of up to 15 Hz and a pulse duration of only 15 – 400 ms, the LS1200 SHR laser/diode laser enables the fastest treatment sequences with maximum efficiency. With up to 50 million pulses, the hair removal diode is also the longest lasting in Europe.

Meanwhile, the patented DEPILICE gas cooling system with a cooling strength of up to -10°C ensures unparalleled patient comfort during every treatment.

SAPPHIRE LS1200 SHR LASER

Sapphire SHR Laser Diodenlaser LS1200 Seitenansicht

Fast & painless
permanent hair removal

Already from 4 applications – depending on the body part – the hair can be permanently removed with the SHR diode laser LS1200 – and completely painless. The first treatment successes can be seen after just one application.

MEDICAL APPROVAL - FOR MEDICAL & COSMETIC PROFESSIONALS

The LS1200 SHR diode laser is manufactured under high quality & production standards and has medical approval. The hair removal laser may be used by both medical professionals and cosmeticians. The effectiveness of permanent hair removal with the LS1200 has been proven through medical studies.

Worldwide unique
1200W spot power

With a real & verifiable output power of 1200 watts, the LS1200 SHR diode laser promises the most powerful permanent hair removal of its generation.

50 Mio applicator pulses

The SAPPHIRE light source, a diode or diode bar with a wavelength of 808NM, is by far the world’s longest-lasting with up to 50 million pulses. Of these, even the first 10 million pulses are included in the warranty.

Highest working speed

The combination of a pulse frequency of up to 15 Hz and a pulse duration of only 15 – 400 ms enables the SAPPHIRE SHR diode laser to provide the fastest treatment sequences with maximum efficiency.

Patented Depilice
gas cooling system

The SHR diode laser features a patented DEPILICE gas cooling system with a unique cooling strength of up to -10°C. On the one hand, the novel cooling system brings the advantage that the treatment is completely pleasant for the customer. On the other hand, from the operator’s point of view, distilled water no longer needs to be changed or refilled, as is usually the case with hair removal devices.

2 high performance power supplies

Compared to other laser hair removal devices, the LS1200 SHR diode laser has 2 high-power power supplies working in parallel, which allow very fast pulse sequences without sacrificing performance and consequently success.

For all hair & skin types (1 - 5)

With the latest laser hair removal technology of the SAPPHIRE diode laser, lighter hair colors and darker, more tanned skin types can also be treated.

5 treatment modes

To achieve maximum treatment results, SAPPHIRE’s European SHR Diode Laser allows 5 different treatment options to be aligned according to skin & hair type: Single, Multi, Sensitive, Middle & Long Pulse modes.

Highest user safety

The hair removal laser ensures the highest user safety due to protection class 1 and highly insulated application part type BF.

Stationary & mobile use

The LS1200 SHR diode laser can also be used in mobile applications, as the functional housing of the unit can be removed from the base frame.

Sapphire LS1200 SHR Laser Diodenlaser mit patentierter Depilice-Kühlung
Sapphire LS1200 SHR Laser Diodenlaser Haarentfernung Mobilansicht
Sapphire MED SHR Laser Diodenlaser Applikator

BROCHURE & PRICES

BY MAIL & E-MAIL

CONSULTING

BY PHONE & ON SITE

LEASING OFFER

NON-BINDING & FREE

TREATMENT WITH THE LS1200 SHR LASER/Diode laser

THE ADVANTAGES WITH LS1200 SHR Laser/Diode Laser

IPL Devices & SHR Diode Laser in comparison

IPL Devices (Pulse light)

LS1200 SHR Laser | SHR Diode laser

WELLCOTEC SERVICE

We have been advising, training, supplying and servicing our customers at home and abroad for over 30 years. Our renowned theory & practice trainings provide the necessary knowledge, our comprehensive marketing service the necessary communication as well as our technical & repair service the necessary security, so that you can be permanently successful with our SHR diode lasers.

TRAINING

Our certified & comprehensive theory & practice training prepares you & your team for operation & use with the SHR Diode Laser LS1200. The training can take place either at our training center in Cologne or directly at your site.

MARKETING

Benefit from our marketing know how and get among others our individualized flyers, roll-ups, customer vouchers & digital data for your website & social media for the SHR Diode Laser LS1200.

Equipment

We supply you with high quality & medical accessories you need for SHR diode laser application. These include special gel, nitrile gloves, couch paper rolls & protective goggles.

Interesting Facts about LS1200 SHR Laser/Diode Laser

Any skin & hair type! With SHR laser technology, compared to IPL device technology, both dark and light hair can be permanently removed.

A “permanent hair removal” is not necessarily life-long, but rather defined for a longer period of life. Why is this so? In the skin there are always inactive cells of the hair, which could not be detected during the treatment period. Over time, these cells can become active in isolated cases and thus stimulate hair growth. Likewise, pregnancies or hormonal fluctuations (e.g. menopause) can cause new hair cells to be formed and hair growth to resume.

Laser hair removal can be applied to the whole body.

No, the treatment is painless. Only a “tingling” warming effect is felt.

With the innovative diode laser hair removal, permanent depilation can be achieved in just 4 to 5 sessions. The duration of the treatment always depends on the body area to be treated and can be between 10 minutes and about 3 hours.

After a treatment for permanent hair removal, a soothing depilation after-treatment cream should be applied as a preventive measure. You can obtain this directly from us. It is also important not to expose the treated skin to sunlight. A sun blocker is therefore essential.

The IPL device technology is considered the first method of permanent hair removal, which works via light application. “IPL” is the abbreviation for “Intense Pulsed Light” and translates as intensely pulsed light, which is applied to the skin and hair without being bundled.

IPL device technology works with single, high-energy pulses of light that are applied to the skin unbundled, spot by spot. The IPL method uses short pulses with a duration of 2 – 300 milliseconds, which, however, generate high energy of up to 120 joules per cm².

The applied IPL energy is absorbed to the hair papillae via melanin, the pigment of the hair. Melanin has the crucial property of being able to absorb photons (light particles). The hair in turn transmits this light energy to the follicle, where a heat of up to 72°C is generated. As a result of the heating, the hair root is destroyed, so that no new hair can grow.

At the same time, however, the IPL device technology also brings with it limitations: because with IPL, primarily dark hair – ideally on light skin – can be permanently removed. Because in dark hair, the pigmentation and thus the melanin content is most pronounced, so that the light absorption and consequently the permanent hair removal can take effect at all. Lighter hair, e.g. white or grayish, on the other hand, has only a low melanin content and can therefore absorb light energy only weakly or not at all.

In order to counteract this problem and to enable permanent depilation for as many different hair and skin types as possible, the IPL device technology was supplemented by the SHR glide method. Meanwhile, the SHR technology is mainly represented in the field of innovative high-power laser hair removal – as SHR laser or SHR diode laser.

“SHR” is the abbreviation for Super(-fast) Hair Removal and refers to the glide technology of the laser applicator, with which permanent hair removal is possible much faster than with original IPL systems.

The SHR laser technology works with several, low-energy and bundled laser pulses, which are applied to larger areas of the skin in a gliding movement of the applicator.
larger areas of the skin. The technology utilizes up to 15 pulses per second, which causes the skin layer to be evenly & moderately
heated.

As with IPL technology, the applied SHR energy is absorbed by the hair papillae via melanin, i.e. the hair’s pigment. Melanin has the property of being able to absorb photons (light particles) and transmit them. 

On the other hand – and here lies the difference to the IPL device technology – at the same time a direct denaturation of the stem cell proteins takes place at a target temperature of 45°C, so that the nutrition supply to the hair root is cut off and it is consequently obliterated. Thus, the SHR technology uses two ways for permanent hair removal.

The advantage of SHR hair removal is that due to the dual effect technology every skin & hair type can be treated. In addition, the relatively lower heat release not only reduces the risk of skin burns, but also guarantees a completely painless treatment.

The SHR laser technology uses an optimized filter with a light wavelength of 808 or 810 NM for permanent hair removal, in order to
to penetrate directly & focused into the skin layer where the hair roots are located. This allows maximum & highly efficient results to be achieved.

After successful hair & skin analysis, a special gel is first applied to the skin or the body area to be treated, which primarily contributes to the cooling function. Now the SHR laser handpiece is “driven” several times over the skin area to be treated & emits several laser pulses.

In total, about 6 – 8 treatments per body part are needed to achieve permanent hair removal.

The SHR laser technology can only develop its full effect if the hair is treated in its growth phase. Because only in this phase is the hair connected to the hair root, so that the light energy absorbed via the melanin can also be transmitted to the hair root – and thus ultimately obliterate it.

At any one time, only about 20% of the hair is in its growth phase, as this phase is different for each hair. Consequently, several treatments are necessary to achieve permanent hair removal.

Meanwhile, small home IPL devices for self-dehairing are very much in vogue – but such hair removal is strictly warned against, among others, on the part of the Ärztezeitung.

Because there is on the one hand the risk of the Unterdosierung, which leads to a Ergrauen instead of removing the hair. On the other hand, there is the risk of overdosing, which in turn causes burns, light damage and also an increased risk of skin cancer.

Permanent (laser) hair removal should therefore always be performed by trained personnel. This is the only way to ensure maximum success without (skin) damage.

Exklusive Partner for Germany,
Austria, Switzerland & Netherlands
Wellcotec ist exklusiver Partner von SAPPHIRE in Deutschland, Österreich, Schweiz und in den Niederlanden

WELLCOTEC is the only official partner authorized by the manufacturer for sales & service of the LS1200 SHR diode laser – in Germany, Austria, Switzerland & in the Netherlands. We are glad to know with SAPPHIRE a strong manufacturer from Europe at our side, who attaches as much importance to innovation & quality as we do.

WELLCOTEC Clients

Our clientele includes physicians, alternative practitioners, health centers, wellness & spa facilities, cosmeticians and also career changers based at home & abroad. We are happy when our customers are too – this has always been our company philosophy.

Product brochure, prices & advice
get prices & information about medical SHR Diode laser

Just fill out the following form and receive further information about the Sapphire LS1200 MED SHR diode laser and our company free of charge and without obligation by mail & e-mail. We will take care of your request as soon as possible. Fields marked with * are mandatory. Please always check your Junk-/Spam-E-Mail folder, where our Info-Mail might have been received by mistake.

Click or drag files to this area to upload. You can upload up to 2 files.
Persönliche Einstellungen
Wenn Sie unsere Website besuchen, kann sie über Ihren Browser Informationen von bestimmten Diensten speichern, normalerweise in Form von Cookies. Hier können Sie Ihre Datenschutzeinstellungen ändern. Bitte beachten Sie, dass das Blockieren einiger Arten von Cookies Ihre Erfahrung mit unserer Website und den von uns angebotenen Diensten beeinträchtigen kann.